Heat Resistant Environment Friendly Rain Gutter Sink For Agricultural Markets
Description of PVC Rain Gutter
The gutter is made from non-plasticized high-impact polyvinyl chloride (PVC-U), which features increased plastic resistance to high temperatures, as well as a high resistance to mechanical deformations, stretching and bending. Specially selected components increase resistance to UV radiation, acid rain and air pollution. One of the advantages of PVC is that there is no need to provide maintenance and painting.
Convention stainless steel gutter is produced in folded-plate processing, limited in length, and connected by welding on site, so steel gutter quality always excessively depends on the proficiency of technicians. Besides, it is expensive and difficult in construction.
Sizes of PVC Rain Gutter
| Large Gutter | 280×250×280mm |
| Medium Gutter | 200×180×200mm |
| Small Gutter | 160×140×160mm |
| High and low Gutter | 95×130×180mm |
| Villa rain sink | 100×83×110mm |
Feature of PVC Rain Gutter
1. As a professinal factory who sells in stone coated roof tile, asphalt shingle and drainage system for roof.
2. ASA(Special one) double-color coextrusion, color never fade.
3.. High temperature resistance, anti-aging, antioxidant, acidbase mold erosion resistance, oxidation resistance.
4.Easy to cut and install.
5.. Environmental friendly & Recyclable.
6.Ethylene polymer material, leedfree, good UV performance.
Applications of PVC Rain Gutter
Mainly used for eaves, building items, and roofs to collect and discharge rainwater, suitable for matching with steel structure engineering, wave tile, and sunlight tile engineering. Factories, warehouses, car parks, agricultural and trading markets, road fences, balconies and Roofing Gutter, Water sink, Washing gutter etc.
Installation
1) When installing the sink, the bottom support frame must be made of steel, with sufficient force filled with materials. The bottom frame must be in a straight line and have a support point every 1.5-1.8 meters. The two sides of the sink must be protected by iron frames;
2) The connection part of the sink or the two ends of the connection port should be supported by support frames;
3) It is not allowed to open holes for drainage at any part of the sink without authorization, as this will affect the service life of the sink. Special drainage accessories and water pipes must be connected to the sewer;
4) Pre drilling is required during installation, and the drilling diameter shall be 50% larger than the screw diameter, reserved for thermal expansion;
5) The external temperature changes greatly. To prevent thermal expansion and contraction, it is recommended that the installation of the entire water tank should not exceed 18 meters. If it is necessary to exceed this, segmented installation and drainage must be carried out.
FAQ
1. If you are a manufacturer or trader?
We are a manufacturer, and we have our own factory in Foshan, Guangdong province in China.
2. What countries you exported to before?
We exported our products to Africa, India, Vietnem, Ecuador, Australia, Colombia, Mexico etc.
3. Can I get a free sample first?
Yes, of course. We can offer free sample, but customers need to pay for the shipping cost.
4. What is your terms of delivery?
A: FOB, CIF
5. Do you have accessories?
Yes, we can provide various accessories.
Product Tags:
|
|
Heat Resistant Environment Friendly Rain Gutter Sink For Agricultural Markets Images
|
